THERMAL AND MICROSTRUCTURAL ANALYSIS OF THE LOWMELTING Bi–In–Sn TERNARY ALLOYS
Low-melting alloys, based on bismuth, indium, and tin, have found commercial use in soldering,safety devices, coatings, and bonding applications, due to their low melting point temperature ofeutectic compositions and small differences between their liquidus and solidus temperatures.Based on this, the accurate knowledge of their thermal properties s...
By Ljubiša Balanović, Dragan Manasijević, Ivana Marković, Milan Gorgijevski, Uroš Stamenković, Dajana Milkić
RELATIONSHIP OF MICROSTRUCTURAL TRANSFORMATIONS IN AUSTEMPERED NODULAR CAST WITH MICROHARDNESS VALUES
Austempered ductile iron is the last addition to the group of ductile irons obtained by isothermalimprovement of classic ductile iron. Austempered nodular cast iron has improved mechanicalproperties and a different matrix microstructure compared to known iron-based castings. Thistype of casting is obtained by isothermal improvement - austempering, ...
By Adisa Burić, Belma Fakić, Edib Horoz, Hasan Avdušinović, Raza Sunulahpašić
EFFECT OF MIXING OF COOLING MEDIA ON MICROSTRUCTURE AND HARDNESS OF STEEL 23MnB4
Steel cooling is an important technological operation because the final microstructure of the steel,and therefore its properties, depends on the cooling rate. The speed of steel cooling depends onnumerous factors, one of which is the movement of the cooling media. This paper presents theresults of testing the influence of mixing the cooling media o...
By Almaida Gigovic-Gekic, Hasan Avdušinović, Amna Hodzić, Branka Muminović
THE INFLUENCE OF ALLOYING ELEMENTS TO CAST IRON MICROSTRUCTURE
Gray cast iron belongs to the group of iron casts that contain graphite particles in the microstructure. Graphite particles in gray cast iron have the shape of lamellae and are connected to each other. The specific combination of properties of gray cast iron, which is satisfactory for many applications, and simple and cheap productio...
By Anida Henjaković, Hasan Avdušinović, Amir Muslić
PARTIAL REPLACEMENT OF CEMENT WITH CALCINED CLAYS FROM CENTRAL BOSNIA
Two clays from deposits located in the region of Central Bosnia, and kaolin obtained from a localspark plug and technical ceramics factory were calcined at 800, 900, and 1000 ºC. The pozzolanicactivity of calcined raw materials was determined using the P test. Calcined clay from the depositBilalovac showed slightly better reactivity compared t...
By Marina Jovanović, Adnan Mujkanovic, Nadira Bušatlić, Nedžad Haračić, Amina Čaušević
POSSIBILITY OF PRODUCTION OF METALLURGICAL CEMENT TYPE CEM III/A 42.5N IN CEMENT PLANT KAKANJ
This paper examines the possibility of producing metallurgical cement type CEM III/A 42.5N at theKakanj Cement Factory. The tested samples contain respectively 46%, 41%, and 38% of granulatedblast furnace slag and the rest is clinker. According to the test results, all cement samples meet theEN 197-1 standard in terms of physical-mechanical propert...
By Nevzet Merdić, Nedžad Haračić, Ilhan Bušatlić, Nadira Bušatlić, Adnan Mujkanovic
DEVELOPMENT OF NEW CEMENT TYPE CEM II/C-M ACCORDING TO EN 197-5
According to new EN 197-5 is possible to combine clinker with blast furnace slag, silica fume,pozzolana, fly ash, burnt shale, and limestone from 36 – 50% while clinker content should be from50 – 64%. In this paper are presented results of laboratory testing concerning CEM II/C-M(S+W) production where a sample is prepared by mixing 50% ...
By Nedžad Haračić, Nevzet Merdić, Ilhan Bušatlić, Nadira Bušatlić
THE MEASURES OF ENERGY EFFICIENCY IN NATRON-HAYAT MAGLAJ
In industries such as the chemical industry, the oil industry, the steel industry, and the pulp andpaper industry, energy systems are the basis of the production process and represent keyindicators of the profitability of the process. Energy efficiency in industry is long-term related totechnological development and the dynamics of renewal of produ...
By Nusret Imamović, Armina Čamić, Haris lepić
SCREENING OF PARTICULATE MATTER IN THE URBAN AREA OF SARAJEVO
Particulate matter enters the atmosphere as a result of human activity, as well as natural processes.Since we still cannot influence natural processes, reducing the concentration of floating particlesis possible only by adjusting human activity. The emission of solid particles occurs during a largenumber of everyday activities. Depending on the act...
By Aida Šapčanin, Aida Hasanović, Farzet Bikić
ANALYSIS OF THE ORIGIN OF AIR POLLUTION IN THE AREA ZENICA-DOBOJ CANTON
The paper presents data on emissions of analyzed pollutants into the air (SO2, NOx, CO, VOC,NH3, PM10, PM2.5, PAH, Pb, Cd, and Hg) by sector (industry and energy, small combustion plants,road traffic and services-agriculture and animal husbandry), and by cities and municipalities inthe area of the Zenica-Doboj Canton. Based on the analyzed data, it...
By Vehid Birdahić, Muvedet Šišić, Nusret Imamović, Halim Prcanović, Mirnes Duraković