Home
More Filters
METALLIC AND NONMETALLIC MATERIALS

Vol 15 2025

METALLIC AND NONMETALLIC MATERIALS

Vol 14 2023

METALLIC AND NONMETALLIC MATERIALS

Vol 13 2021

METALLIC AND NONMETALLIC MATERIALS

Vol 12 2018

METALLIC AND NONMETALLIC MATERIALS

Vol 11 2016

METALLIC AND NONMETALLIC MATERIALS

Vol 10 2014

Cefazolin sorption on oxycellulose was performed to obtain bioactive material which, as drug carriers, has a possibility of prolonged release and local application. Oxycellulose with different content COOH groups was obtained by selective oxidation. The bonding was performed in an antibiotic water solution concentration of c=3,4∙10-3 molL-1, while ...

By Pero S. Sailović, Borislav N. Malinović, Darko R. Bodroža

01.05.2023. Professional paper Metallic materials
THE INFLUENCE OF ALLOYING ELEMENTS TO CAST IRON MICROSTRUCTURE

Gray cast iron belongs to the group of iron casts that contain graphite particles in the microstructure. Graphite particles in gray cast iron have the shape of lamellae and are connected to each other. The specific combination of properties of gray cast iron, which is satisfactory for many applications, and simple and cheap productio...

By Anida Henjaković, Hasan Avdušinović, Amir Muslić

Steel S690 QL is a high-strength quenched and tempered, fine-grained structural steel with a minimum yield strength of ReH of 690 MPa and with guaranteed toughness (Charpy) for rolled plates with a thickness of 3 to 50 mm. This paper presents the examination and analysis of the microstructure and grain size results after quenching an...

By Mirsada Oruč, Aida Imamović, Almaida Gigovic-Gekic, Milenko Rimac

More recently modified stainless steels have been used to produce various structural elements that work in complex operating conditions. Stainless steel X8CrNiS18-9 (standard EN 10088-3: 2005) is the most commonly used austenitic stainless steel due to its good machinability. This steel has high mechanical and working properties than...

By Derviš Mujagić, Aida Imamović, Mustafa Hadžalić

This paper describes the process of degradation of the structure of the inlet header of the intermediate reheater (MPr) 2 input header at the boiler of Unit 7 of the Thermal Power Plant Kakanj, determined on the basis of tests of replicas and hardness at characteristic places of the header. Headers, with minor delays, have been in co...

By Armin Husika, Belma Fakić, Milenko Rimac

The strength development of concrete containing ground granulated blast-furnace slag (GGBS), aby-product of iron in blast-furnace, as a partial substitute for cement,was experimentally studied.Levels of replacement of cement by slag were 12.5 %, 25 %, 37.5 %, and 50 % by weight ofcement. Slag taken immediately after it was discharged from the blast...

By Adnan Mujkanovic, Marina Jovanović, Nadira Bušatlić, Amel Zahirović, Anesa Bitić, Nevzet Merdić

01.05.2023. Research article Nonmetallic materials
CALCULATION OF THERMAL CONDUCTIVITY FOR CRYSTALLINE NANOSTRUCTURES

We have introduced a theory for the calculation of thermodynamic characteristics for somecharacteristic nanostructures (ultrathin films and superlattices), using the adapted method of twotimetemperature Green's functions. In this paper, we have determined the coefficient of thermalconductivity using the definition of free energy and then compared t...

By Siniša M. Vučenović, Jovan P. šetrajčić

01.05.2023. Research article Nonmetallic materials
CHARGE CARRIERS STATES IN A MODEL OF CuO SUPERCONDUCTIVE CERAMICS

The translational symmetry of the distribution of atoms (ions) of the charge carriers (electrons orholes) system is broken by sputtering (doping),and due to the existence of two boundary surfaces.This is a model of high-temperature superconductors in which the observed symmetry breakingorthogonal to the CuO plane is treated as a perturbation. Singl...

By Jovan P. šetrajčić, Siniša M. Vučenović

01.05.2023. Research article Environment protection and sustainable development
RESEARCH OF THE POSSIBILITY OF USING THE HEAT GENERATED IN THE AEROBIC BIODEGRADATION PROCEDURE

The paper describes the research methodology of the heat generated by the biologicaldecomposition of a mixture of sludge from WTP (wastewater treatment plant) and biowaste and itsuse outside the system for a controlled biodegradation process. Earlier research in this area definedthe optimal mixtures of sludge and biowaste that ensure quality manage...

By Muvedet Šišić, Vehid Birdahić, Sanela Beganović, Mirnes Duraković, Farzet Bikić

01.05.2023. Review paper Environment protection and sustainable development
THE ROLE OF WOOD-BASED PRODUCTS IN SUSTAINABLE DEVELOPMENT

Wood is renewable, recyclable, climate-friendly material, and presents an important segment inachieving circular economy and sustainability concepts. To be able to link these two concepts,production and consumption systems need to transform towards sustainability. Wood-basedproducts play a role in mitigating climate change by reducing carbon from t...

By Petar Ćurić, Jelena Obranković, Andreja Pirc-Barčić

Conference of University of Zenica