...

By Mohammad Safi

ISO 9001 is an international standard that includes requirements for a quality management system in a business organization that it must meet in order to operate in compliance with internationally recognized standards. Benefits of implementing this standard in organizations are large and besides the ability to sell and produce t...

By Mirsada Oruč, Dragana Agić, Fuad Klisura, Neira Delić

Oil pump, apropos gear pump is used for lubrication in the automotive industry. In the process of the engine, and the oil pump, there is rotation of the shaft and without bearing sleeve there would be „spending”casing which is made of cast iron. The bearing sleeve is mounted in order to reduce wear and ensure the consiste...

By Belma Fakić, Adisa Burić, Edib Horoz, Amira Pašalić, Elvedin Ćosatović

The practical objective of this paper was based on improving the cleanliness of forging ingots, improving the ingots yield by the reduction of ingot head, taking the example carbon steels produced in Steelwork Zenica In that sense, the modification of existing technologies has been done in the segment of secondary metallurgy dur...

By Omer Kablar, Aida Mahmutović, Menzur Plaćo, Šaban Žuna

Stainless steel plays an important role in all emerging technologies. Detrimental effects of inclusions in steel do not only depend on their sizes, shape, distribution, but also on their chemical composition and mechanical properties. For this reason, the control of formation of non metallic inclusions and the characterization presen...

By Derviš Mujagić, Aida Mahmutovic, Mustafa Hadžalić, Amna Karić

This paper examines the impact of improving working conditions and increasing capacity with Dual track system. Three different cases were examined: Power ratio 100-650 kW, 200-550 kW and 300-350 kW. All three different cases were obtained in very similar conditions (time necessary for chemical analysis, alloying processes, slag cleaning e...

By Šehzudin Dervišić, Sedad Mušinović, Ajla Huseljić

For the production of self-compacting concrete for a specific application, with desired properties in fresh and hardened state, it is necessary to combine the constituent materials in the optimum proportions. The proportioning of self-compacting concrete has to start with defining the required properties. For a particular application, a self-compac...

By Adnan Mujkanović, Ilhan Bušatlić, Marina Jovanović, Dženana Bečirhodžić

In recent decades the production of chemically bonded refractory materials has been clearely increased. In this paper was examined the added amount effection of 50% solution of mono aluminum phosphate (MAP) as a binder in refractory concretes. Quartz, sand and chamotte are used as fillers. Research has shown that the bond between the filler and the...

By Nadira Bušatlić, Ilhan Bušatlić, Mitar Perušić

Cement is a mineral hydraulic binder which is formed by sintering (heat treatment) primary minerals of cement clinker at a sintering temperature. In the cement composite only cement releases heat by reaction with water, and image about the amount of heat or about temperature of solid concrete is obtained by determination of the heat of hydration of...

By Ilhan Bušatlić, Nevzet Merdić, Nedžad Haračić, Amna Karić, Sumeja Hibović

In this paper the effect of two different fly ash types on the properties of self-compacting concrete in fresh state and hardened state was investigated: fly ash from Thermal power plant “Kakanj” and fly ash from Thermal power plant “Tuzla”. The results of testing fresh self-compacting concrete properties show that addition ...

By Adnan Mujkanović, Ilhan Bušatlić, Marina Jovanović, Dženana Bečirhodžić