Dimensional tolerances of semi-products for the automotive industry became extremely narrow, and allow no deviations in the production process. In present research work the distortion behaviour of C15E (1.1141) and 42CrMo4 (1.7225) steels during two common industrial heat treatments (quenching and controlled heating and cooling) was ...

By Damir Česnik, Matej Rustja, Milan Bizjak, Blaž Karpe

The paper presents comparison of microstructure and hardness of Cu-Al-Ni shape memory alloy before and after heat treatment (quenching at 900°C/60 min/water and tempering at 300°C/60 min/water). Microstructural analysis was obtained by optical microscopy (OM) and scanning electron microscopy (SEM) equipped with energy dispersive spectrometr...

By Mirko Gojić, Ivana Ivanić, Stjepan Kožuh, Milenko Rimac, Omer Beganović, Kemal Begović Begović, Borut Kosec

This paper studies the effect of annealing on the microstructure and hardness, microhardness and electrical conductivity changes of cold deformed (ε=40%) sintered pure copper and Cu-4at.% Au alloy. The samples of pure copper and Cu-4at.%Au alloy were obtained by sintering, followed by prefinal rolling, quenching and final rolling with 40% r...

By Ivana Marković, Svetlana Nestorović, Desimir Marković, Dragana Živković

The main characteristic of hydrotechnical cement, which is used to build massive structures, is the low heat of hydration. In this work is examined the effect of the electrofilter ash with a high content of calcium oxide addition on the hydration heat of Portland cement. The cement samples containing 0% to 50 % fly ash from TPP „Kakanj“...

By Ilhan Bušatlić, Nevzet Merdic, Nadira Bušatlić, Asim Ibrahimagić, Azra Smajić

In order to determine the possibility of using recycled aggregate for concrete production, properties of recycled aggregate and limestone aggregates: particle size distribution, oven-dried particle density, saturated and surface dried particle density and apparent particle density, water absorption, resistance to fragmentation and impact resistance...

By Adnan Mujkanovic, Marina Jovanović, Adela Telalović, Almir Bajraktarević, Adis Ćatić

The impact of chemical corrosion on the durability of tundish working lining based on slurry mix is discussed in this work. The results of chemical and mineralogical analysis in the sample of tundish working layer after lining lifetime are presented. Infiltration of slag effected in a reduced thermal shock resistance resulting in thermal stress on ...

By Aida Mahmutović, Omer Kablar, Šaban Žuna

The study examined adsorption of Reactive Violet 5 (RV-5) textile dye from the aqueous environment on MFI zeolites as adsorbents at 283, 293 and 303 K. The reaction was observed on the original NH4ZSM-5 zeolite, a product of the Zeolyst International American company, and on the modified HZSM-5 zeolite. The concentration of dye before and after the...

By S. Sladojević, D. Bodroža, J. Penavin Škundrić, Z. Levi, Lj. Vasiljević, B. Škundrić

In Europe and the world number of companies and institutions which in development strategies include social responsibility strategies is bigger every day. It is a response to market demands and pressures of economic and social community on the issue of environmental protection. Corporate social responsibility is the responsibility of the company as...

By Neira Delić, Milenko Rimac, Mirsada Oruč

Today global steel producers give increased emphasis on protecting the environment and deploy into production and supporting the activities of the so-called concept of sustainable development, which is reflected particularly in the implementation of environmental management systems. In the work a short review of the World and Slovenian steel produc...

By Borut Kosec, Igor Budak, Gorazd Kosec, Erika Vidic, Zorana Tanasić, Mirko Soković

In the process of production of iron and steel substantial amounts of fuel and raw materials are consumed. Metallurgical coke as fuel, reducing agent and material that provide gas flow trough blast furnace processes must possess certain properties in terms of strength, due to expected changes in the conditions of high temperature environment. Deman...

By Sulejman Muhamedagić, Hasan Avdušinović