Particle size distribution measurements were performed on ground granulated blastfurnace slag by laser diffraction with the powder dispersed in distilled water with sodium hexametaphosphate used as dispersing agent, as well as in pure distilled water and propan-2-ol. Two samples of slag with Blaine fineness 4700 cm2 /g and5500 cm2 /g were tested.Th...

By Adnan Mujkanovic, Marina Jovanović, Amel Zahirović, Mustafa Hadžalić, Nevzet Merdić

In this paper, we have introduced new contemporary materials for heat harvesting, based on thermoelectric effect (or Seebeck effect): rear earth mono-pnictides and graphene. Measure of effectiveness for transformation of heat to electricity is represented with zT factor, which measure heat harvesting potential. zT factor is related with heat and el...

By Siniša M. Vučenović, Jovan P. Šetrajčić, Steva K. Jaćimovski

This paper presents an experimental study to evaluate the possibility of CEM IV 42,5N producing by increasing the specific cement surface from 3180 to 3850 cm2 /g. In this paper, fly ash is used as a cement admixture because fly ash possesses both hydraulic and pozzolanic properties. If one part of the clinker, as a major cement admixture, is repla...

By Nevzet Merdić, Nedžad Haračić, Ilhan Bušatlić, Nadira Bušatlić, Amna Karić

The paper examined the changes in properties of conventional castables composed of a mixture of calcium-aluminate cement and chamotte caused by changes in the particle size distribution. Properties of castable with 20 % cement and „as received“ chamotte were compared with castableofparticle size distribution adapted to the calculated di...

By Marina Jovanović, Adnan Mujkanovic

Some specific aspects in the improvement processes related to I-beams production, especially related to the conversion of classical to the universal rolling mills stands are presented in this paper. One of practical solutions in the a.m. conversion is described in some more details, as well as some of better designs in the variety of I-beams, conce...

By Faik Uzunović, Omer Beganović, Lamija Sušić

This paper presents an experimental investigation into the effect of nanosilica addition to porosity and capillary absorption of concrete. Three concrete mixtures 0%, 2%, and 4% nanosilicaby weight of cementweretested.The procedure described in ASTM C642-06 was used to determine the total volume of permeable voids.Water absorption and the rate of w...

By Adnan Mujkanovic, Anesa Ključanin, Marina Jovanović, Amel Zahirović, Amna Karić, Nevzet Merdić

The presented investigation work investigates thermal properties of the ultra-high hardness (UHH) armour steel. Steel is distinguished with high hardness and strength. It is sold in the quenched or tempered state, because achieving planned hardness which has to be between 590 HB and 640 HB. In the frame of the investigation work the analysis of the...

By Borut Kosec, Tjaša Kranjec, Blaž Karpe, Aleš Nagode, Milan Bizjak, Jure Bernetič, Mirko Gojić, Zijah Burzić, Milan Rimac, Gorazd Kosec

Proper calibration of the device is important to prevent potential sources of error, which ensures that the test results most effectively represent the value of the sample being tested. In microhardness testing, the loading force does not exceed 1.96 N. The test surface requires a more complex metallographic preparation, and the smaller the injecti...

By Edib Horoz, Belma Fakić, Adisa Burić, Mirsada Oruč

Dual phase steels are low carbon steels which are thermo-mechanically processed to getting better formability and toughness than ferrite-perlite steels with similar tensile strength. The microstructure of these steels consisting of a ferrite matrix with hard martensitic/ bainitic second phase. The concept of representative volume element (RVE) is c...

By Emina Vardo, Aida Imamović, Jessica Gola

Many researches are done for finding various ways of improving steel properties, since it's the most used material in the world. Instead of using high-alloyed steels, which are expensive, microalloying of carbon steels that will retain equal properties is an efficient replacement. For this research it was tested melts of low-carbon steel grade SAE ...

By Aida Imamović, Adna Puljić, Omer Kablar