Steel cooling is an important technological operation because the final microstructure of the steel,and therefore its properties, depends on the cooling rate. The speed of steel cooling depends onnumerous factors, one of which is the movement of the cooling media. This paper presents theresults of testing the influence of mixing the cooling media o...

By Almaida Gigovic-Gekic, Hasan Avdušinović, Amna Hodzić, Branka Muminović

Low-melting alloys, based on bismuth, indium, and tin, have found commercial use in soldering,safety devices, coatings, and bonding applications, due to their low melting point temperature ofeutectic compositions and small differences between their liquidus and solidus temperatures.Based on this, the accurate knowledge of their thermal properties s...

By Ljubiša Balanović, Dragan Manasijević, Ivana Marković, Milan Gorgijevski, Uroš Stamenković, Dajana Milkić

Austempered ductile iron is the last addition to the group of ductile irons obtained by isothermalimprovement of classic ductile iron. Austempered nodular cast iron has improved mechanicalproperties and a different matrix microstructure compared to known iron-based castings. Thistype of casting is obtained by isothermal improvement - austempering, ...

By Adisa Burić, Belma Fakić, Edib Horoz, Hasan Avdušinović, Raza Sunulahpašić

Gray cast iron belongs to the group of iron casts that contain graphite particles in the microstructure. Graphite particles in gray cast iron have the shape of lamellae and are connected to each other. The specific combination of properties of gray cast iron, which is satisfactory for many applications, and simple and cheap productio...

By Anida Henjaković, Hasan Avdušinović, Amir Muslić

Steel S690 QL is a high-strength quenched and tempered, fine-grained structural steel with a minimum yield strength of ReH of 690 MPa and with guaranteed toughness (Charpy) for rolled plates with a thickness of 3 to 50 mm. This paper presents the examination and analysis of the microstructure and grain size results after quenching an...

By Mirsada Oruč, Aida Imamović, Almaida Gigovic-Gekic, Milenko Rimac

More recently modified stainless steels have been used to produce various structural elements that work in complex operating conditions. Stainless steel X8CrNiS18-9 (standard EN 10088-3: 2005) is the most commonly used austenitic stainless steel due to its good machinability. This steel has high mechanical and working properties than...

By Derviš Mujagić, Aida Imamović, Mustafa Hadžalić

The production of titanium is very expensive, so it is interesting to research technologiesthat require lower costs, such as the HDH hydrogenation-dehydrogenation processtechnology, which is used for cheaper powder production from the waste material oftitanium alloys.This paper presents the hydrogenation procedure of a recycled piece of the Ti6Al7N...

By Aida Imamović, Mirsada Oruč, Šaban Žuna, Esad Hadžibulić

Occupational safety is a very important factor in the process of creating a safe work environment.The benefits employers, employees and even the state as a whole can reap greatly depend on theway occupational safety is organized and implemented. This paper aims to make a general analysisof the condition of safety at work in Bosnia and Herzegovina, ...

By Miliša Todorović, Asmir Helvida, Snežana Živković

Aluminium alloy foams are a form of porous metal whose structure resembles the shape of natural materials such as coral, bone, sponge, etc. Due to their structure, these materials retain good mechanical properties of the base material while being significantly lighter than non-porous metal. Metal foams can be used as energy and vibration absorbe...

By Karla Grgić, Igor Ćulum, Branimir Lela, Jure Krolo, Sonja Jozić

The particle shape and size of the starting powders represent the most important physicalproperties, on which the quality of the compacts and final sintered products depends. Two types ofpowder were analyzed in the paper - electrolytic copper powder with a dendritic particle shape andwater-atomized copper powder with an irregular particle shape. Th...

By Ivana Marković, Dragan Manasijević, Ljubiša Balanović, Uroš Stamenković, Milijana Mitrović, Stevan Trujić