Proper calibration of the device is important to prevent potential sources of error, which ensures that the test results most effectively represent the value of the sample being tested. In microhardness testing, the loading force does not exceed 1.96 N. The test surface requires a more complex metallographic preparation, and the smaller the injecti...

By Edib Horoz, Belma Fakić, Adisa Burić, Mirsada Oruč

Mine development imposes very high technical requirements of the mine hoisting equipment in terms of speed of transport. To meet these requirements it is necessary to properly design the structural elements of mine hoisting equipment which means that they must have the proper characteristics of the materials from which they are made such as mechani...

By Mustafa Hadžalić, Mirsada Oruč, Raza Sunulahpašić

The great development of the industry has caused the need for systematization in the classification of raw materials and finished products. For this reason, all industrialized countries have their own standards, so called national standards or norms for production and delivery. With the unification of European countries, and also for the import and...

By Mirsada Oruč, Raza Sunulahpašić, Almaida Gigovic-Gekic, Sulejman Muhamedagić

In this paper the effect of different heat treatment (recrystallization, spheroidizing and normalizing) processes on microstructure of the steel DC04 intended for deep drawing is presented. The steel is cladded with CuZn10 layers by explosive welding. Since the melting temperature of alloy CuZn10 is significantly lower (melting range 1025-1045 oC) ...

By Omer Beganović, Belma Fakić, Ali Mohammed Ali Mohammedzain, Babekir Ahmed Osman Mohammed, Faik Uzunović

Austempered Ductile Iron (ADI) is obtained by exactly controlled heat treatment process of nodular cast iron. Ductile iron samples are first austenitised to dissolve carbon, then quenched rapidly to the austempering temperature to avoid the formation of deleterious pearlite or martensite. Resulting ausferrite microstructure consists of acicular fer...

By Hasan Avdušinović, Almaida Gigovic-Gekic, Šehzudin Dervišić

Mechanical properties of the ductile iron strongly depend on its microstructure. Different microstructural constituents result in different values of mechanical and ductile properties of ductile iron castings. One of the possibilities to design (define) microstructure of ductile iron castings is an application of different heat treatment processes....

By Hasan Avdušinović, Salaheldin Abdelmagid Mohamed Badreldin, Mohammed Abdelgadir Abdalla Mohammed, Faik Uzunović

This paper is concerned with carburization heat treatment. Standard carburization generally entails several steps: carburization of the surface layer by carbon diffusion at high temperatures, subsequent hardening and stress relief. This combination of hard surface and resistance to breakage upon impact is useful in parts such as a cam or ring gear,...

By Belma Fakić, Mohamed Fadlalla Mohamed Ahmed, Babekir Ahmed Osman Mohammed, Faik Uzunović

Today almost all manufacturers of dental materials in their certificates of quality of material give its chemical composition, mechanical properties, process ability in aesthetic characteristics while informations about thermal properties are not available.Within the work measurements of the thermal properties of five selected, in daily dental prac...

By Borut Kosec, Mateja Vodlan, Blaž Karpe, Aleš Nagode, Milan Bizjak, Igor Kopač, Alenka Pavlič, Igor Budak, Tatjana Puškar, Henry Taubmann, Mirko Gojić

The results of two light optical tomographies (LOT) of two-phase steels are presented and compared in this paper. Two-phase steels show a microstructure consisting of a carbon-rich second phase and a ferritic matrix. In this work, microstructures are compared with a martensitic and a bainitic second phase. Tomographies are very important for materi...

By Emina Vardo, Jessica Gola, Frank Mücklich

The purpose of this paper is to describe the basic reasons for obtaining narrower clad layers of CuZn10 alloy in regards to the central layer of steel strip DC04 are described. Some reasons for the reduction of the thickness of clad layers along the side edges of the strip are also described, as well as the change in the length of these parts with ...

By Omer Beganović, Almedina Čamdžić, Faik Uzunović