The production of titanium is very expensive, so it is interesting to research technologiesthat require lower costs, such as the HDH hydrogenation-dehydrogenation processtechnology, which is used for cheaper powder production from the waste material oftitanium alloys.This paper presents the hydrogenation procedure of a recycled piece of the Ti6Al7N...

By Aida Imamović, Mirsada Oruč, Šaban Žuna, Esad Hadžibulić

Steel S690 QL is a high-strength quenched and tempered, fine-grained structural steel with a minimum yield strength of ReH of 690 MPa and with guaranteed toughness (Charpy) for rolled plates with a thickness of 3 to 50 mm. This paper presents the examination and analysis of the microstructure and grain size results after quenching an...

By Mirsada Oruč, Aida Imamović, Almaida Gigovic-Gekic, Milenko Rimac

The HK30Nb steel pipe casting was obtained by centrifugal casting. This steel is austenitic stainless steel grade AISI HK 30 and is standardized according to ASME SA-351 in as cast condition. HK 30 Nb steels not standardized i.e. it is HK 30 steel modified with niobium. In addition to the required mechanical properties, this steel is also tested fo...

By Mirsada Oruč, Alen Delić, Almaida Gigovic-Gekic, Raza Sunulahpašić

The ore consolidation process is a thermal process and it happens at the temperatures of the ore melting beginning, allowing the ore grains, additives and fluxes to be connected into a solid piece of sinter. The amount of carbon in the sinter mixture and the FeO content of the produced sinter affect the mechanical resistance of the sinter. Indicato...

By Sulejman Muhamedagić, Mirsada Oruč, Amna Karić

Metallic materials thanks to the excellent combination of data on material properties are obtained by standardized and agreed testing of samples made from semi-finished or finished products. Metallic materials can be tested by different testing techniques. One of them is metallographic testing, for which a light microscope is used as a basic device...

By Adisa Burić, Belma Fakić, Edib Horoz, Mirsada Oruč

Proper calibration of the device is important to prevent potential sources of error, which ensures that the test results most effectively represent the value of the sample being tested. In microhardness testing, the loading force does not exceed 1.96 N. The test surface requires a more complex metallographic preparation, and the smaller the injecti...

By Edib Horoz, Belma Fakić, Adisa Burić, Mirsada Oruč

Mine development imposes very high technical requirements of the mine hoisting equipment in terms of speed of transport. To meet these requirements it is necessary to properly design the structural elements of mine hoisting equipment which means that they must have the proper characteristics of the materials from which they are made such as mechani...

By Mustafa Hadžalić, Mirsada Oruč, Raza Sunulahpašić

Surface roughness is the totality of microgeometric irregularities on the surface of an object and it is caused by various factors, from which the most important are machining and processing techniques. This characteristic of the material is very important, especially in the case of high-quality materials designed for the demanding conditions of ex...

By Raza Sunulahpašić, Mirsada Oruč, Edina Karić

The calibration measurement capability - CMC is defined as the smallest uncertainty that a laboratory can achieve within its powers when carried out more or less daily calibration of nearly ideal measurement standards intended to define, generate, keep or renew units of that size, or one or more of its value, or when carried out more...

By Branka Muminović, Mirsada Oruč, Almaida Gigović-Gekić, Raza Sunulahpašić

ISO 9001 is an international standard that includes requirements for a quality management system in a business organization that it must meet in order to operate in compliance with internationally recognized standards. Benefits of implementing this standard in organizations are large and besides the ability to sell and produce t...

By Mirsada Oruč, Dragana Agić, Fuad Klisura, Neira Delić