In the following paper results of the investigation of the “Bauschinger effect” are presented. It was done by model which was made in ABAQUS and observed from deep rolling simulation results of residual stresses. Later, comparison of the results are presented by variation of forces and overlapping factor. Deep rolling (DR) is a mechanic...

By Ammar Sejdinoski

The results of two light optical tomographies (LOT) of two-phase steels are presented and compared in this paper. Two-phase steels show a microstructure consisting of a carbon-rich second phase and a ferritic matrix. In this work, microstructures are compared with a martensitic and a bainitic second phase. Tomographies are very important for materi...

By Emina Vardo, Jessica Gola, Frank Mücklich

The purpose of this paper is to describe the basic reasons for obtaining narrower clad layers of CuZn10 alloy in regards to the central layer of steel strip DC04 are described. Some reasons for the reduction of the thickness of clad layers along the side edges of the strip are also described, as well as the change in the length of these parts with ...

By Omer Beganović, Almedina Čamdžić, Faik Uzunović

The microscope has become a more common tool in the cement industry. Evaluation of clinker using microscopy is a powerful technique that can help improve clinker production and cement quality. The key to using the microscopy is understanding the process of clinker production namely how raw materials are transformed into clinker. These transformatio...

By Nevzet Merdić, Nedžad Haračić, Ilhan Bušatlić, Nadira Bušatlić, Adis Merdić

Clinker dust or cement kiln dust (CKD) is fine granulated material which generate during the thermal treatment of raw meal and during the clinker cooling process. By applying different methods in certain stages of the technological process it is possible to extract the mentioned dust. The chemical composition of the clinker dust depends on type and...

By Nevzet Merdić, Nedžad Haračić, Ilhan Bušatlić, Nadira B Bušatlić, Zehrudin Osmanović, Nisad Avdić

This paper presents a model of molecular ultrathin (nano) crystalline film and feature research methodology of exciton system as well as analysis of dielectric properties of these spatially very restricted structures with perturbed fundamental parameters on surfaces. Using the two-time Green's functions, adapted for research of symmetry breaking cr...

By Siniša M. Vučenović, Jovan P. Šetrajčić

Urban environments are subject to various pollutions where, among other things, acoustic pollution. Consequently, the study of acoustic pollution is an issue that is addressed in several aspects: economic, political and scientific / research.In this paper we propose a simulation model through the Matlab / Simulink software that shows the effect of ...

By Jozef Bushati, Virtyt Lesha, Darko Petković, Diana K Karuović

...

By Mohammad Safi

The practical objective of this paper was based on improving the cleanliness of forging ingots, improving the ingots yield by the reduction of ingot head, taking the example carbon steels produced in Steelwork Zenica In that sense, the modification of existing technologies has been done in the segment of secondary metallurgy dur...

By Omer Kablar, Aida Mahmutović, Menzur Plaćo, Šaban Žuna

In recent decades the production of chemically bonded refractory materials has been clearely increased. In this paper was examined the added amount effection of 50% solution of mono aluminum phosphate (MAP) as a binder in refractory concretes. Quartz, sand and chamotte are used as fillers. Research has shown that the bond between the filler and the...

By Nadira Bušatlić, Ilhan Bušatlić, Mitar Perušić