The presented investigation work investigates thermal properties of the ultra-high hardness (UHH) armour steel. Steel is distinguished with high hardness and strength. It is sold in the quenched or tempered state, because achieving planned hardness which has to be between 590 HB and 640 HB. In the frame of the investigation work the analysis of the...

By Borut Kosec, Tjaša Kranjec, Blaž Karpe, Aleš Nagode, Milan Bizjak, Jure Bernetič, Mirko Gojić, Zijah Burzić, Milan Rimac, Gorazd Kosec

Shape memory alloys (SMAs) are advanced functional materials suitable for technical applications. Among them Cu-Al-Mn alloy is a promising candidate for industry applications (mechanical engineering, electro-engineering etc.) due to their ductility. In this work analysis of the Cu-Al-Mn alloy after smelting and casting in the laborat...

By Mirko Gojić, Stjepan Kožuh, Ivana Ivanić, Tamara Holjevac-Grgurić, Robert Pezer, Ivan Anžel, Borut Kosec, Milan Bizjak, Ladislav Vrsalović, Dragana Živković

High strength low alloy (HSLA) steels represents a group of low carbon steels that utilise small amaunts of alloying elements, such as Mo, Ti, V and Nb, to attain yield strengths in excess of 275 MPa in the as rolled condition. The main properties of HSLA steels that make them for wide variety of applications are: strength and toughn...

By Gorazd Kosec, Jelena Vojvodić-Tuma, Mirko Gojić, Borut Kosec, Milan Bizjak, Aleš Nagode

Cu-alloys have been intensively studied because of their high thermal conductivity, good electrical and shape memory properties and low cost. Cu-Al-Mn alloys show a higher ductility and elongation in relation to the other Cu-based alloys, as well as a good potential for a cold drawing. Therefore, the investigation of these alloys is ...

By Tamara Holjevac-Grgurić, Dragan Manasijević, Dragana Živković, Ljubiša Balanović, Stjepan Kožuh, Robert Pezer, Ivana Ivanić, Ivan Anžel, Borut Kosec, Ladislav Vrsalović, Mirko Gojić

In this work we studied the response of newly developed armored steel plates PROTAC 500 to the ballistic testing with armored piercing bullets with a core of tungsten carbide, charge 7.62 mm. Interactions between the bullets and the steel plate was investigated by standard metallographic and mechanical testing methods. We were interested in the geo...

By Jure Bernetič, Gorazd Kosec, Slavko Ažman, Matjaž Marčetič, Boštjan Podlipec, Borut Kosec, Aleš Nagode, Ladislav Kosec, Mirko Gojić, Milenko Rimac, Omer Beganović, Zijah Burzić, Franc Vodopivec, Iztok Tomažič

Innovative idea of the device for detecting microstructure changes, concept and construction was carried out and controlled by authors of this article in cooperation with Slovenian industry. Since the electrical resistance is one of the most structurally sensitive properties of the materials, we used its measurement to detect microstructural change...

By Milan Bizjak, Blaž Karpe, Borut Kosec, Aleš Nagode, Goran Brovč, Mirko Gojić