The paper presents the results of a microstructural analysis of copper alloys produced in the Copper Mill Sevojno. The analyzed materials comprise high-purity copper (Cu-ETP and Cu-DHP) and a series of brass alloys with varying zinc content (CuZn10, CuZn15, CuZn28, CuZn30, CuZn33, CuZn37). Various thermomechanical treatments were conducted on the s...

By Aleksandar Nikolajević, Ljubiša Balanović, Dragan Manasijević, Ivana Marković, Uroš Stamenković, Kristina Božinović

The particle shape and size of the starting powders represent the most important physicalproperties, on which the quality of the compacts and final sintered products depends. Two types ofpowder were analyzed in the paper - electrolytic copper powder with a dendritic particle shape andwater-atomized copper powder with an irregular particle shape. Th...

By Ivana Marković, Dragan Manasijević, Ljubiša Balanović, Uroš Stamenković, Milijana Mitrović, Stevan Trujić

In this paper, C45 medium carbon tool steel was investigated after various heat treatments. The thermal properties, specifically thermal diffusivity and thermal conductivity, were measured and also the microstructure analysis was done on a light microscope. Heat treatment of the samples included: 1) the normalization heat treatment a...

By Uroš Stamenković, Ivana Marković, Srba Mladenović, Dragan Manasijević, Ljubiša Balanović, Avram Kovačević, Milan Nedeljković, Jovana Božinović

Thermal properties and microstructure of the Sn-10% Ag and Sn-20% Ag alloys were experimentally investigated in this study. Melting behavior of the alloys were studied using differential scanning calorimetry (DSC). Microstructure of the alloys was analyzed by optical microscopy. The xenon-flash method was used for the measurements of thermal diffus...

By Dragan Manasijević, Ljubiša Balanović, Ivana Marković, Duško Minić, Aleksadar Đorđević