This paper investigates the effects of oil quenching and tempering at various temperatures on the mechanical and structural properties of X155CrVMo12-1 tool steel. The steel specimens were austenitized at 1030 °C for half an hour, followed by quenching and tempering at different temperatures. Mechanical properties were assessed by measuring the...

By Uroš Stamenković, Ivana Marković, Srba Mladenović, Dragan Manasijević, Petar Milanović, Milan Nedeljković

In this paper, C45 medium carbon tool steel was investigated after various heat treatments. The thermal properties, specifically thermal diffusivity and thermal conductivity, were measured and also the microstructure analysis was done on a light microscope. Heat treatment of the samples included: 1) the normalization heat treatment a...

By Uroš Stamenković, Ivana Marković, Srba Mladenović, Dragan Manasijević, Ljubiša Balanović, Avram Kovačević, Milan Nedeljković, Jovana Božinović

This study reports experimental and thermodynamic investigation of the Cu-In-Ni ternary system at 300 °C. Isothermal section of the Cu-In-Ni system at 300 °C was calculated using optimized thermodynamic parameters for the constitutive binary systems from literature. Microstructure analysis of selected alloy samples after long time annealing...

By Aleksandar Đorđević, Milena Premović, Duško Minić, Vladan Ćosović, Milutin Živković, Dragan Manasijević, Milan Kolarević